Compton, Alfred G. (Alfred George), 1835-1913 · New York : J. Wiley & Sons · leaf 57
43 UPSETTING AND WELDING, 5. The link should be a perfect ellipse, and with the 7-inch piece of iron that you have used, should be of the exact size and shape of Fig. 32, Fig. 32. (Full size.) If the iron is too much reduced, or the weld bad, cut out the imperfect part, and repeat. This will, of… … Fig. 33. hammer instead of the pene. Having upset and bent the piece as before, lay it on the anvil as in Fig. 33, only about half an inch of the ends rest-
Metal-work
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
