Frary, Francis C. (Francis Cowles), 1884-1970 · New York ; London : McGraw-Hill · leaf 53
42 Laboratory Manual of Glass-blowing around it to prevent it from growing larger when it is heated. The author prefers to blow the bulb in the middle of the tube, draw off one end of the bulb, and blow out the desired hole where the tube was drawn off. The whole bulb must generally be reheated and… … Fig. 13. — a , Kjeldahl trap; b, suction pump on smaller tubing. The suction pump can also be made on 1/4-inch tubing, and one joint saved if desired, by constricting the tube to form the raceway for the water and air, as shown in b, Fig. 13. tSee page 10 for method.) But it is more difficult to…
Glass blowing and working · Scientific apparatus and instruments
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.