t the milled head spring back into its original posi- tion. This will lock the front in place. When through using pull out the milled head and center lens by moving the front up or down, as the case may be, until the springs on the back of front board and fastened to top brace, engage the pins on… … FIG. II. as shown in Fig. II., and sliding front in either direction to the desired position. Lock in position by pushing lever to the left to limit of motion. When through using reverse the operation shown in Fig. II., and slide back to the center and lock in position.
Kodak camera · Photography
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
