Inside Out Library · Explore

The young mechanic : containing directions for the use of all kinds of tools, and for the construction of steam engines and mechanical models, including the art of turning in wood and metal (1871)

Lukin, James, b. 1828 · New York : G. P. Putnam · leaf 70

An illustration from The young mechanic : containing directions for the use of all kinds of tools, and for the construction of steam engines and mechanical models, including the art of turning in wood and metal, 1871, leaf 70
ith accuracy. Use the gauge as before in marking the mortices, trying it until it is so fixed that it will leave the proper width of the holes, namely, half an inch (which is the thickness of the strips which are to form the framework). This is upon the supposition that your gauge has but one… … Fig. 24. along its length on one side with a dovetailed slit, that is, a groove which is wider below than above. This is generally made in a brass plate attached to the stem of the gauge, but sometimes in the wood itself. In this slides a slip of brass which can be drawn back by pulling the knob A,…

Handicraft · Industrial arts

Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.

More pictures from The young mechanic : containing directions for the use of all kinds of tools, and for the construction of steam engines and mechanical models, including the art of turning in wood and metal

More like this